Alcatel-Lucent OmniAccess 5740 - No List; No Match-List

Common Classifiers
Left running head:
Chapter name (automatic)
410
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO LIST
no list <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command deletes the
list with reference to its name. If a list is in use, it cannot be deleted. The deletion
of lists cannot be globally applied to all the lists that are configured. They can be
deleted only one at a time.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
The following example deletes the list L1:
ALU(config)# no list L1
NO MATCH-LIST
no match-list <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command deletes the
match-list with reference to its name. If a match-list is in use, it cannot be deleted.
The deletion of match-lists, as in case of lists, cannot be globally applied to all the
match-lists that are configured. They can be deleted only one at a time.
PARAMETER
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# no match-list M1
Parameter Description
name Name of the list, which has to be deleted.
Parameter Description
name Name of the match-list, which has to be deleted.