Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

terminal length
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
151
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
TERMINAL LENGTH
terminal length {0|<5-512>}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to set
the terminal length for this session.
PARAMETERS
EXAMPLE
ALU(config)# terminal length 10
TERMINAL MONITOR
terminal monitor [<0-7>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
display the log messages of specified and higher (numerically lower) priorities in
the terminal window. This terminal could be launched through SSH or Telnet.
PARAMETERS
EXAMPLE
ALU(config)# terminal monitor
Parameter Description
0 0 for no pausing.
5-512 Number of lines on screen.
Parameter Description
0-7 Priority level of the messages.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English