System Configuration and Monitoring
Left running head:
Chapter name (automatic)
132
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW SNMP VIEW
show snmp view
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the SNMP view configuration.
PARAMETERS
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show snmp view
ViewName Status MIBFamily
-------- ------ ---------
view123 included .1.3.6.1
RELEASE HISTORY
Release 2.3: command was added.
To Next Page
Loading...
Need help?
General
