Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
958
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IP DHCP CLIENT
ip dhcp client <client-name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
create a DHCP client object. This enters the DHCP client object configuration
mode.
This object is associated with an interface to apply the defined configuration (in
the object) to the interface and start DHCP negotiation.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp client client1
ALU(config-dhcp-client-client1)#
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
client-name DHCP client object name.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English