Quality of Service
Left running head:
Chapter name (automatic)
894
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO POLICY-MAP
no policy-map <policy-map name>
This command is entered in the Configuration Mode. This removes the configured
policy-map.
Note: You cannot remove a policy map if it is attached to an interface either in ingress or
egress direction.
NO PRIORITY
no priority
This command is entered in the Class Mode. This command removes the priority
attribute of the traffic-class, and configured bandwidth, if any.
NO QOS-PRECLASSIFY
no qos-preclassify
This command is entered in the Interface Configuration Mode. This command
disables the pre-classification.
NO RANDOM-DETECT
no random-detect [ip-dscp|ip-dscp-values|ip-precedence|ip-
precedence-values|values]
This command is entered in the Class Mode. This command disables the random-
detect on ip-dscp and ip-precedence. The command also deletes all ip-dscp, ip-
precedence configuration, or all random-detect configuration.
NO RULE
no rule <1-65535>
This command is entered in the Class-map Mode. This command is used to
delete a specific rule from the class map, with reference to its line/rule number.
To Next Page
Loading...
Need help?
General
