Alcatel-Lucent OmniAccess 5740 - Show Crypto Client Profile

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
840
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW CRYPTO CLIENT PROFILE
show crypto client profile [<profile-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the IPsec client profile details.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show crypto client profile myclientprofile
Crypto Client Profile:myClientProfile
IKE Policy:myikePolicy
Transform Set :myxform
DPD Interval:60 sec
DPD Timeout:300 sec
IPSec SA Lifetime:28800 sec
FS Group:Group 2
IPSec Client object :myclientObj;
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
profile-name Name of the client profile.