Alcatel-Lucent OmniAccess 5740 - Key-Chain; Key-String

Router Information Protocol
Left running head:
Chapter name (automatic)
472
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
KEY-CHAIN
key-chain <key-chain name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a key chain.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# key-chain allen
ALU(config-keychain allen)#
KEY-STRING
key-string <key string>
DESCRIPTION
This command is entered in the Key-chain Key Mode. This command is used to
configure the password for the key.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-keychain-key 100)# key-string sg123
Parameter Description
key-chain name Name of the key chain being configured.
Parameter Description
key-string The password for the key.