ssh
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
665
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SSH
ssh [vrf <vrf-name>] {<ip-address>|<hostname>} <user-name>
[version {1|2}]
DESCRIPTION
This command is entered in the Configuration Mode. SSH command is used for
logging into a remote system specified by the address.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ssh vrf ALU-vrf 10.91.0.25
RELEASE HISTORY
Release 2.3: parameter vrf <vrf-name> was added.
Parameter Description
vrf-name Name of the VRF. If the VRF name is
specified, the packets will be routed
using the routing table of the specified
VRF on a interface associated with the
VRF.
ip address IP Address of the remote system.
hostname Host name of the remote system.
user-name The login/user name to be used.
version {1|2} SSH version number - version 1 or
version 2.
To Next Page
Loading...
