area range
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
553
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
AREA RANGE
area {<0-4294967295>|<ip-address>} range {<ip-address subnet-
mask|<ip-address/prefix-length>}[not-advertise]
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
specifies an address range for which a single route will be advertised.
PARAMETERS
DEFAULT VALUE
Disabled.
EXAMPLE
ALU(config-router ospf 30)# area 1 range 10.0.0.0/8 not-
advertise
Parameter Description
0-4294967295 Identifier of the area about which the routes are to be
summarized. Area ID specified as a decimal value.
ip-address Identifier of the area about which the routes are to be
summarized. Area ID specified as an IP address.
range {<ip-
address subnet-
mask|<ip-
address/prefix-
length>}
IP address with its mask or prefix length.
not-advertise Sets the address range status to DoNotAdvertise. The Type
3 summary LSA is suppressed and the component
networks remain hidden from other networks.
To Next Page
Loading...
