System Configuration and Monitoring
Left running head:
Chapter name (automatic)
128
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW SNMP DETAILS
show snmp details
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the SNMP configuration details.
PARAMETERS
None.
EXAMPLE
ALU(config)# show snmp details
SNMP status : Enabled
Traps : Enabled
System information
------------------
System Contact : support@alcatel-lucent.com name alu1
System Location : [Not configured]
Community-Access Community-String
---------------- ----------------
read-only private
read-write [Not configured]
Trap-Host Trap-Port Version Trap-Community
--------- --------- ------- --------------
1.1.1.1 10 v1 test
1.1.1.11 11 v1 test1