Alcatel-Lucent OmniAccess 5740 - Show Crypto Client Object

show crypto client object
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
839
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW CRYPTO CLIENT OBJECT
show crypto client object [<object-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the IPsec client object details.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show crypto client object myclientObj
Idle Timeout:300 sec
Primary DNS Server:A.B.C.D
Secondary DNS Server:A.B.C.D
Primary WINS Server: A.B.C.D
Secondary WINS Server:A.B.C.D
Client Firewall:Pass
Save Password:Yes
Local Client Address List:ClList
Local Server Address List:SerList
Authentication Method List:rad
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
object-name Name of the client object.