Alcatel-Lucent OmniAccess 5740 - Show Firewall Intrusion Snort Rule

show firewall intrusion snort rule
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
857
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW FIREWALL INTRUSION SNORT RULE
show firewall intrusion snort rule {category <name> |classtype
<name>| disable{category|classtype|priority|sid}|priority
{high|low|medium}|sid <1-4294967295>...}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. Use
this command to display the contents of a specific snort rule.
PARAMETER
EXAMPLE
ALU#show firewall intrusion snort rule category dos
alert ip $EXTERNAL_NET any -> $HOME_NET any (msg:"DOS Jolt
attack"; dsize:408; fragbits:M; reference:cve,1999-0345;
classtype:attempted-dos; sid:268; rev:4;)
alert udp $EXTERNAL_NET any -> $HOME_NET any (msg:"DOS Teardrop
attack"; fragbits:M; id:242; reference:bugtraq,124;
reference:cve,1999-0015; reference:nessu)
alert udp any 19 <> any 7 (msg:"DOS UDP echo+chargen bomb";
reference:cve,1999-0103; reference:cve,1999-0635;
classtype:attempted-dos; sid:271; rev:4;)
Parameter Description
category <name> Details of the snort rules belonging to a
specified category.
class-type <name> Details of the snort rules belonging to a
specified class type.
disable{category|classtype|
priority|sid}
Details of the snort rules belonging to a
disabled category, class type, priority
and rule ID.
priority {high|low|medium} Details of the snort rules of a specific
priority.
sid <1-4294967295...> Details of the snort rules of a specific
rule ID.