show startup-config
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
133
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW STARTUP-CONFIG
show startup-config
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. Shows
the configuration currently stored on the permanent storage media. This
configuration is read at system startup. The command “write memory” has to be
entered to view the output of this command.
PARAMETERS
None.
EXAMPLE
ALU(config)# show startup-config
!
! NVRAM config last updated at 06:25:14 GMT Wed Nov 08 2006
from line 0
!
! Statlog Configuration
!
logging on
logging buffered priority 7
logging buffered size 128
logging console 3
logging system 5
logging remote 1.1.1.1 port 514 priority 7
service timestamps log
hostname ndm-70
! PVST Global configuration
spanning-tree
!
snmp enable
!
modem disable
!
! SNMP Configurations
!
--More--
To Next Page
Loading...
Need help?
General
