Quality of Service
Left running head:
Chapter name (automatic)
898
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PRIORITY BANDWIDTH
priority bandwidth {<101-700000000>|percent <1-100>}
DESCRIPTION
This command is entered in the Class Mode. This command is used to set the
traffic class as a priority class and configure bandwidth for the same.
Note: You cannot mix the absolute bandwidth command with percentage bandwidth
command across policy hierarchy.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-pmap-P1-C1)# priority bandwidth 101
Parameter Description
101-700000000 The absolute bandwidth (bps) value.
1-100 The bandwidth in percentage.
To Next Page
Loading...
