Alcatel-Lucent OmniAccess 5740 - Show Key-Chain

Router Information Protocol
Left running head:
Chapter name (automatic)
486
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW KEY-CHAIN
show key-chain [<key-chain name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the key chain configured on the system.
PARAMETERS
EXAMPLE
ALU> show key-chain
key-chain alu1
key 1
key-string alcatel-lucent
Accept lifetime (00:00:00 01 Jan 2000) - (Infinite) [Valid Now]
Send lifetime (00:00:00 02 Feb 2001) - (Infinite) [Valid
Now] key-chain alu2 key 2
key-string lucent
Accept lifetime (Always Valid) - (Always Valid) [Valid Now]
Send lifetime (Always Valid) - (Always Valid) [Valid Now]
ALU> show key-chain alu1
key-chain alu1
key 1
key-string alcatel-lucent
Accept lifetime (00:00:00 01 Jan 2000) - (Infinite) [Valid Now]
Send lifetime (00:00:00 02 Feb 2001) - (Infinite) [Valid Now]
Parameter Description
key-chain name Name of the key chain being associated to the interface.