Alcatel-Lucent OmniAccess 5740 - License Backup

license backup
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1001
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
LICENSE BACKUP
license backup <license-name> {fpkey:|ftp:|tftp:|user:}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
take a back-up of the license file from the running system to a given destination.
The backup file can be stored in the user area or fpkey (front panel USB). It can
also be sent to a remote location using FTP or TFTP.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# license backup testipsec5740.lic user:
Backup license name: testipsec5740.lic
License backed up successfully.
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
license-name Name of the license file whose back-up
is to be taken.
fpkey: Backup the license file to fpkey (front
panel USB).
ftp: Backup the license file to a remote
location using FTP.
tftp: Backup the license file to a remote
location using TFTP.
user: Backup the license file to the user area.