Point to Point Protocol
Left running head:
Chapter name (automatic)
308
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW PPP LCP CONFIGURATION
show ppp lcp configuration Serial <slot/port:channel>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the PPP LCP configuration information for a specified interface.
PARAMETERS
EXAMPLE
ALU# show ppp lcp configuration Serial 0/0:0
LCP Max Echoes : 5
LCP Echo Interval : 60 (sec)
LCP Restart Interval : 30 (sec)
Parameter Description
<slot/port:channel> Slot, port and channel group number of the
serial interface.
To Next Page
Loading...
Need help?
General
