Alcatel-Lucent OmniAccess 5740 - Import Signed-Cert

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
64
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IMPORT SIGNED-CERT
import signed-cert <name> {<certificate-content>|fpkey <file-
path>|ftp:|tftp:|http:|https:|scp:}
DESCRIPTION
This command is entered in the ca-identity mode. This command imports X.509
certificate signed by the CA from a remote location.
You also have an option to directly enter or paste the certificate after the
command. Enter upto 80 characters on a line. Enter a blank line to exit.
Note: Currently, SCP option is not supported.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-ALUCA)# import signed-cert cert_Simpson ftp:
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
name Name that is used to identify the
certificate.
certificate-content Directly enter or paste the certificate
conetent after the command.
fpkey <file-path> FPkey file path. To copy the certificate
into the front panel USB memory.