IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
816
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
MAP
map {<nhs-ip-address> <nbma-address>|multicast dynamic}
DESCRIPTION
This command is entered in the Client Object Configuration Mode. This command
is used to map the static (destination) IP address to NBMA address of the NHS.
This command can also be used in spoke to spoke scenario, where in the static
(tunnel) IP address as well as the NBMA address of the spoke to be reached is
known. In such a scenario, enter the static IP address and the NBMA address of
the spoke in the map command.
Note: Currently ‘multicast dynamic’ parameter is not supported.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-nhrp-alu-dmvpn)# map 192.168.1.1 1.1.1.1
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
nhs-ip-address IP address of the NHS.
nbma-address NBMA address of the NHS.
To Next Page
Loading...
