Alcatel-Lucent OmniAccess 5740 - Clear Host; Ip Domain-List

DNS (Domain Name Service) Client
Left running head:
Chapter name (automatic)
978
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR HOST
clear host {*|<host-name>}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears the dynamically learnt name/address mapping, or all such
mappings if "*" is specified.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# clear host *
IP DOMAIN-LIST
ip domain-list <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
add domain names to the domain-list.
These are the domain names, which are to be appended to the host names while
lookup. By default, the default domain-name is used. The domain names added in
the list are probed in order.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# ip domain-list test
Parameter Description
* All the dynamically learned entries are
deleted.
host-name Deletes dynamically learned host-name.
Parameter Description
name Domain name to be added to the domain list.