Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

no shutdown
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
267
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO SHUTDOWN
no shutdown
DESCRIPTION
This command is entered in the Interface Configuration Mode to administratively
bring up the interface.
PARAMETERS
None.
EXAMPLE
ALU(config)#interface Serial 0/0
ALU(config-if Serial0/0)# shutdown
SHOW INTERFACE
show interfaces Serial [<slot/port>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the configuration details of the specified serial interface.
PARAMETERS
EXAMPLE
ALU# show interfaces Serial 0/0
Serial0/0 is up, line protocol is up
X.21 DTE Serial attached
Internet address is 15.0.0.1/8
MTU 1500 bytes, BW 2048 Kbit, DLY 0 usec,
reliability 0/255, txload 0/255, rxload 0/255
loopback not set
Encapsulation hdlc, keepalive set (10 sec)
Last input never, output never, output hang never
Last claring of "show interface" counters never
Queueing strategy: fifo
Output queue: 0 0 (size/max) 0 drops:Input queue 0/0 (size/max) 0 drops
Conversations: 0/0/0 (active/max active/max total)
Reserved Conversations: 0/0 (allocated/max allocated)
Available Bandwidth 2048 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
12105 packets input, 167342 bytes, 0 no buffer
Parameter Description
slot/port Slot and port number of the serial
interface.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English