duplex
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
173
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
DUPLEX
duplex {auto|full|half}
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
configures duplex operation on an interface.
PARAMETERS
None.
DEFAULT VALUE
The default Duplex mode is “auto”.
EXAMPLE
ALU(config-if GigabitEthernet3/0)# duplex full
To Next Page
Loading...
