Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Quality of Service
Left running head:
Chapter name (automatic)
892
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NETWORK-CONTROL
network-control
DESCRIPTION
This command is entered in the Class Mode. Configures the traffic class a
network control class.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-qos-P1-C1)# network-control
NO AUTO QOS DIFF-SERV
no auto qos diff-serv
This command is entered in the Interface Configuration Mode. This command
disables Auto QoS Diff-Serv on an interface.
NO AUTO QOS TEMPLATE
no auto qos template {diff-serv|voip} <policy-map name>
This command is entered in the Configuration Mode. This command removes the
specified Auto QoS template.
NO AUTO QOS VOIP
no auto qos voip
This command is entered in the Interface Configuration Mode. This command
disables Auto QoS VoIP on an interface.
NO BANDWIDTH
no bandwidth
This command is entered in the Class Mode. This command removes the
bandwidth configuration.
Parameter Description
network-control The highest priority among all the traffic
classes.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English