Alcatel-Lucent OmniAccess 5740 - Pfs; Show Crypto Ipsec Profile

pfs
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
809
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PFS
pfs {group1|group2|group5}
DESCRIPTION
This command is entered in the IPsec Profile Configuration Mode. This command
is used to attach a PFS group to an IPsec profile.
PARAMETERS
DEFAULT VALUE
If no PFS group is attached to an IPsec profile, group2 PFS is used.
EXAMPLE
ALU(ipsec-profile-PF1)# pfs group2
SHOW CRYPTO IPSEC PROFILE
show crypto ipsec profile [<profile-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the IPsec profile details.
PARAMETERS
EXAMPLE
ALU(config)# show crypto ipsec profile
crypto ipsec profile PF1
ike-policy secret
transform-set transet1
ike-identity ID01
pfs group2
! lifetime seconds 28800
! Applied to:
interface Tunnel1
ipsec-profile PF1
Parameter Description
group1|group2|group5
Name of the PFS group.
Parameter Description
profile-name
Displays the configuration details for the
specified IPsec profile.