Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

vrrp group-id track-interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
167
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
VRRP GROUP-ID TRACK-INTERFACE
vrrp <1-8> track-interface <interface-name> decrement <1-255>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to configure the interface to be tracked for a VRRP group. Also, decrements
the priority of the VRRP group from the configured VRRP priority when the
tracked interface goes down.
If the priority of a VRRP group is 100, and the decrement value is set to 60, when
the tracked interface goes down, the VRRP priority is set to 40.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if GigabitEthernet3/0)# vrrp group track-interface
serial 1/0:0 decrement 60
RELEASE HISTORY
Release 3.0: parameter ‘decrement <1-255>’ was introduced.
Parameter Description
1-8 Specifies the group number. It is in the
range 1 - 8.
interface-name Interface name.
1-255 Priority value to be set.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English