Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

show ip rip interfaces
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
483
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP RIP INTERFACES
show ip rip interfaces [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays summary address entries in the RIP database.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU# show ip rip interfaces
RIP Interface Table
-------------------
Interface Interface Address Interface Mask Send Ver Recv Ver Flags
GigabitEthernet3/0 1.1.1.2 255.255.255.0 2 2 B S
GigabitEthernet3/1 10.91.2.6 255.255.255.0 2 2
(Flags - U: Unnumbered P:Passive B:V2 Broadcast S:Split horizon disabled)
ALU#
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
vrf-name
Name of the VRF.
Interface
The interface-type.
Interface
Address
IP address of the interface.
Interface
Mask
Interface mask in four part dotted decimal format.
Send Ver The Send version.
Recv Ver The Receive version.
Flags Values are:
• U: Unnumbered
• P: Passive
• B: V2 Broadcast
• S: Split horizon disabled

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English