Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Point to Point Protocol
Left running head:
Chapter name (automatic)
288
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEBUG PPP ALL
debug ppp all [detail-level <1-9>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows all the debug messages pertaining to the PPP functionality.
PARAMETERS
DEFAULT VALUE
By default, debug is disabled.
EXAMPLE
ALU(config)# debug ppp all
Parameter Description
all Displays all the debug messages
pertaining to PPP functionality.
detail-level Displays detail level (default is 1).
1-9 Enable with specific detail level.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English