no encapsulation pppoe
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
315
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO ENCAPSULATION PPPOE
no encapsulation pppoe
This command is entered in the Interface Configuration Mode. This command
removes the PPPoE encapsulation configured on the interface. This also removes
the PPPoE server given IP address, and restores the configured IP address on
the interface (if any).
NO PPPOE AC-NAME
no pppoe ac-name
This command is entered in the Interface Configuration Mode. The “no” command
removes the access concentrator name configured.
NO PPPOE MAX-RETRY
no pppoe max-retry
This command is entered in the Interface Configuration Mode. The “no” command
sets the max-retry value to its default, i.e., 0.
NO PPPOE RETRY-TIMER
no pppoe retry-timer
This command is entered in the Interface Configuration Mode. The ‘no’ command
resets the retry-timer to its default, i.e., 10 seconds.
NO PPPOE SERVICE-NAME
no pppoe service-name
This command is entered in the Interface Configuration Mode. This command
removes the service name configured.
To Next Page
Loading...
