Point-to-Point Protocol over Ethernet (PPPoE)
Left running head:
Chapter name (automatic)
322
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW PPPOE STATISTICS
show pppoe statistic GigabitEthernet <slot/port>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the PPPoE statistics information on the GigE interface.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show pppoe statistics GigabitEthernet 3/0
PADI sent: 13
PADO received: 24
PADO dropped: 11
PADR sent: 13
PADS received: 13
PADT sent: 12
PADT received: 0
RELEASE HISTORY
Release 2.3.2: command was introduced.
Parameter Description
slot/port Slot and port number of the interface.