Alcatel-Lucent OmniAccess 5740 - Ip Ddns Method

Dynamic DNS (DDNS) Client
Left running head:
Chapter name (automatic)
990
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IP DDNS METHOD
ip ddns method <method-name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a DDNS method. This enters the DDNS method configuration mode.
A method contains a set of attributes such as protocol, server, URL and interval
timer. All these used to update the DDNS server.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip ddns method myDdnsObj
ALU(config-ddns-myDdnsObj)#
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
method-name Name of the DDNS method.