Alcatel-Lucent OmniAccess 5740 - Neighbor Route-Map

Border Gateway Protocol
Left running head:
Chapter name (automatic)
522
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR ROUTE-MAP
neighbor {<ip-address>|<peer-group-name>} route-map <name>
{in|out}
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command applies a route map to incoming or outgoing routes.
PARAMETERS
DEFAULT VALUE
No route maps are applied to a peer.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 35.0.0.0 route-map R1 in
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
name Name of route map.
in Apply to incoming routes.
out Apply to outgoing routes.