DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
964
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP DHCP CLIENT
show ip dhcp client [<client-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows the entire DHCP client related configuration. This includes
DHCP global configurations, all DHCP client objects and their association with
interfaces.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show ip dhcp client
Hostname : myhost
-------------------------------------------
Client_name : test
Vendor_class_id : test1
-------------------------------------------
Client_name : client1
Vendor_class_id : broadband-forum.org
Request_type : address
Client_id : client123
Requested_address : 10.10.10.1
Parameter_request_list : bootfile-name
Interfaces : GigabitEthernet3/0
-------------------------------------------
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
client-name Specify the client object name to display the
DHCP configuration for a specific DHCP
client object.