Alcatel-Lucent OmniAccess 5740 - Service-Policy

Quality of Service
Left running head:
Chapter name (automatic)
904
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
EXAMPLE
ALU(config-qos-P1-C1)# random-detect ip-precedence
ALU(config-qos-P1-C1)# random-detect ip-dscp 5 min-thresh 60
max-thresh max-thresh 600
SERVICE-POLICY
service-policy {in|out} <policy-map name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to attach a policy map to an interface either in ingress or egress direction.
Note: An empty policy can be attached to the interface as a policy-map that has a default
traffic class associated with it, by default.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# interface GigabitEthernet 3/0
ALU(config-if GigabitEthernet3/0)# service-policy in P1
60 30 90 10
61 30 90 10
62 30 90 10
63 30 90 10
Parameter Description
in Ingress direction.
out Egress direction.
policy-map name Name of the policy map.
ip-dscp Min-Threshold Max-Threshold Drop-Probability