Alcatel-Lucent OmniAccess 5740 - No Transparent-Forward; No Transparent-Forward [Force]; No Pass-Through Protocol

Transparent Firewall
Left running head:
Chapter name (automatic)
878
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO TRANSPARENT-FORWARD
no transparent-forward [<tf-policy-name>]
This command is entered in the Interface Configuration Mode. This command
removes the TF feature on the interface, and detaches the TF policy attached to
an interface, if specified.
NO TRANSPARENT-FORWARD [FORCE]
no transparent-forward <name> [force]
This command is entered in the Configuration Mode. This command is used to
delete a TF policy. If the policy is attached to any of the interfaces, it cannot be
deleted.
The "force" keyword will automatically detach the specified policy from respective
interfaces, and deletes the TF policy.
NO PASS-THROUGH PROTOCOL
no pass-through protocol {<1-65535>|appletalk|ipx|nonip}
This command is entered in the TF-Configuration Mode. The command removes
the pass through configuration.