no fragment delay
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
387
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO FRAGMENT DELAY
no fragment delay
This command is entered in the Interface Configuration Mode. The ‘no’ command
sets the fragment delay to default value and hence disables the fragmentation on
MLPPP.
NO SERVICE-POLICY
no service-policy {in|out} <policy-map name>
This command is entered in the Interface Configuration Mode. The ‘no’ command
detaches the policy map from the interface.
NO SLIPPAGE MRU
no slippage mru
This command is entered in the Interface Configuration Mode. The ‘no’ command
sets the slippage MRU to its default, i.e., 32 MRU.
SERVICE-POLICY
service-policy {in|out} <policy-map name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to attach a policy map to the MLPPP interface.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# interface mlppp 100
ALU(config-if mlppp100)# service-policy out P1
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
in|out Ingress or egress direction.
policy-map name Name of the policy map.
To Next Page
Loading...
Need help?
General
