IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
822
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP NHRP
show ip nhrp
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays all the static and dynamic mappings of the NHRP cache.
PARAMETERS
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show ip nhrp
172.23.1.5/32 via 172.23.1.5
Tunnel0 created, expire: 00:00:34
Type: cached, Flags: up
NBMA address: 10.1.5.2
172.23.1.1/32 via 172.23.1.1
Tunnel0 created, never expire
Type: static, Flags: up
NBMA address: 10.0.1.1
RELEASE HISTORY
Release 3.0: command was introduced.
To Next Page
Loading...
