Alcatel-Lucent OmniAccess 5740 - Clear Queuing Statistics; Description

Quality of Service
Left running head:
Chapter name (automatic)
888
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR QUEUING STATISTICS
clear queuing statistics [{<interface-name> {in|out}|in|out}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears the QoS statistics on that particular interface.
PARAMETERS
EXAMPLE
ALU# clear queuing statistics
DESCRIPTION
description <line>
DESCRIPTION
This command is entered in the Policy-map Mode. The description for the policy
map configured.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-qos-P1)# description P1 is the name of the policy-
map.
ALU(config-qos-P1)# show policy-map P1
policy-map P1
description P1 is the name of the Policy Map
Parameter Description
interface name Name of the interface.
Parameter Description
line Description for policy map.