Alcatel-Lucent OmniAccess 5740 - Ip Dhcp Option Routers

ip dhcp option routers
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
933
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DHCP OPTION ROUTERS
ip dhcp option routers <ip-address> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the router in the subnet for which the DHCP is configured.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option routers 1.1.1.1
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
ip-address IP address of the router.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.