Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Filter and Firewall
Left running head:
Chapter name (automatic)
712
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEFAULT TIMEOUT
default timeout {icmp|tcp|udp} <0-2147483648>
DESCRIPTION
This command is entered in the Firewall Session Mode. Firewall session table has
a periodic timer to age out inactive entries. To change these default values, use
this command.
PARAMETERS
DEFAULT VALUE
• Default TCP value is 15 minutes
• Default UDP value is 5 minutes
• Default ICMP value is 30 seconds.
EXAMPLE
ALU(config-firewall)# session
ALU(config-firewall-session)# default timeout tcp 10
FIREWALL
firewall
DESCRIPTION
This command is entered in the Configuration Mode. This command allows you to
enter the firewall sub-configuration mode.
PARAMETERS
None.
EXAMPLE
ALU(config)# firewall
ALU(config-firewall)#
Parameter Description
icmp|tcp|udp Type of connection.
0-2147483648 Timing in seconds to time-out a session.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English