Alcatel-Lucent OmniAccess 5740 - Show Frame-Relay Pvc

Bridging Configuration
Left running head:
Chapter name (automatic)
376
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW FRAME-RELAY PVC
show frame-relay pvc [{<16-1022>|interface Serial <slot/port>}]
DESCRIPTION
This command is entered in the Super User Mode, Configuration Mode or
Interface Configuration Mode. This command displays the status of the Frame
Relay Permanent Virtual Circuit (PVC).
PARAMETERS
EXAMPLE
ALU(config-if Serial0/0)# show frame-relay pvc 20
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
DLCI = 20, DLCI USAGE = LOCAL, PVC STATUS = STATIC, INTERFACE =
Serial0/0
input pkts 195 output pkts 100
in bytes 16156 out bytes 10222
in pkts dropped 6 out pkts dropped 0
in FECN pkts 0 out FECN pkts 0
in BECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
End-to-End Fragmentation Statistics
Packets Fragmented 0
Fragments created 0
Fragments failed 0
End-to-End Reassembly Statistics
Fragments Received 0
Fragments Reassembled 0
Fragments Dropped 0
Fragments Timeout 0
Fragments Rordered 0
Parameter Description
16-1007 DLCI value.
slot/port Slot and port number of the interface.