Alcatel-Lucent OmniAccess 5740 - Match Ip Next-Hop

Protocol Independent Features
Left running head:
Chapter name (automatic)
438
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
MATCH IP NEXT-HOP
match ip next-hop {<1-99>|<1300-2699>|<access-list
name>|prefix-list <prefix-list name>}
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
redistributes any routes that have a next hop router address passed by one of the
specified access lists.
PARAMETERS
DEFAULT VALUE
Routes are distributed freely without being required to match a next hop address.
EXAMPLE
ALU(config-route-map)# match ip next-hop 1
Parameter Description
1-99
Standard IP access list number or name. The list defines
which networks are to be received and which are to be
suppressed in routing updates.
1300-2699
Extended IP access list number or name. The list defines
which networks are to be received and which are to be
suppressed in routing updates.
prefix-list Distributes routes based on a prefix list.
access-list name Name of a specific access list.
prefix-list-name Name of a specific prefix list.