Alcatel-Lucent OmniAccess 5740 - Rule Disable; Rule Enable

Intrusion Detection/Intrusion Prevention System
Left running head:
Chapter name (automatic)
852
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
RULE DISABLE
rule disable {{category <name>...|classtype <name>...| priority
{high|low|medium}|sid <1-4294967295...>}
DESCRIPTION
This command is used in Intrusion Snort Configuration Mode. Use this command
to disable Snort rules by Snort rule ID (SID), class type, priority, or category.
PARAMETER
EXAMPLE
ALU(config-firewall-intrusion-snort)#rule disable classtype
attempted-dos
RULE ENABLE
rule enable {{category <name>...|classtype <name>...| priority
{high|low|medium}|sid <1-4294967295...>}
DESCRIPTION
This command is used in Intrusion Snort Configuration Mode. Use this command
to enable Snort rules by Snort Rule ID (SID), class type, priority, or category.
PARAMETER
EXAMPLE
ALU(config-firewall-intrusion-snort)# rule enable classtype
attempted-dos
Parameter Description
category <name> Name of the Snort rule category.
class-type <name> Name of the Snort rule class type.
priority {high|low|medium} Snort rule priority: low, high or medium.
sid <1-4294967295...> Snort rule ID.
Parameter Description
category <name> Name of the Snort rule category.
class-type <name> Name of the Snort rule class type.
priority {high|low|medium} Snort rule priority: low, high or medium.
sid <1-4294967295...> Snort rule ID.