Alcatel-Lucent OmniAccess 5740 - Client-ID

DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
956
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLIENT-ID
client-id <identifier>
DESCRIPTION
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to configure the client identifier option for a client object.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config–dhcp-client-client1)# client-id client123
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
identifier Specify the client identifier option for a client
object.