Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip dhcp client option hostname
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
959
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DHCP CLIENT OPTION HOSTNAME
ip dhcp client option hostname <host-name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the host name option to be used in the DHCP client requests.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp client option hostname myhost
RELEASE HISTORY
Release 3.0: command was introduced.
NO CLIENT-ID
no client-id <identifier>
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to remove the client identifier option configured for a client
object.
NO DHCP CLIENT
no dhcp client <client-name>
This command is entered in the Interface Configuration Mode. This command is
used to detach the client object from an interface.
NO IP DHCP CLIENT
no ip dhcp client <client-name>
This command is entered in the Configuration Mode. This command is used to
delete a DHCP client object. When a client object is deleted, all the attributes
configured for a DHCP client object will also be deleted.
Parameter Description
host-name Host name of the DHCP client to be
configured on the interface.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English