show logging
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
117
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW LOGGING
show logging
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays log messages with priority 6 and higher.
PARAMETERS
None.
EXAMPLE
ALU> show logging
!
! Statlog Configuration
!
statlog global logging: enabled
buffer logging: level debugging (7)
buffer logging: size (128 k)
buffer logging: used (49.94%)
console logging: level errors (3)
system logging: level notifications (5)
logging timestamp : enabled
!
2005 Oct 13 03:31:06: %CM-6-LOG:LIVENESS 2[83000019 will report once on failure
2005 Oct 13 03:31:07: %CM-6-LOG: SCAN card removed from slot 2
2005 Oct 13 03:31:07: %CM-5-LOG: SLOT L2 (83000019) is vacated
2005 Oct 13 03:31:08: %CM-6-LOG: LIVENESS 2[83000019] will report once on failure
2005 Oct 13 03:31:08: %CM-6-LOG: SCAN card removed from slot 2
2005 Oct 13 03:31:09: %CM-5-LOG: SLOT L2 (83000019) is vacated
2005 Oct 13 03:31:09: %CM-6-LOG: LIVENESS 2[83000019] will report once on failure
2005 Oct 13 03:31:12: %CM-6-LOG: SCAN card removed from slot 2
To Next Page
Loading...
Need help?
General
