Point-to-Point Protocol over Ethernet (PPPoE)
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
313
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CHAPTER 16 POINT-TO-POINT PROTOCOL OVER
ETHERNET (PPPOE)
This chapter documents the Command Line Interface (CLI) commands for the
Point-to-Point Protocol over Ethernet (PPPoE). These commands are used to
configure PPPoE encapsulation on the Gigabit Ethernet (GigE) interface.
This chapter includes table of parameters, default values, and configuration
examples for PPPoE configurations as quick-start and reference information. All
the commands are described in alphabetical order
. For more detailed
information about using and configuring the PPPoE, refer OmniAccess 5740
Unified Services Gateway CLI Configuration Guide.
To Next Page
Loading...
Need help?
General
