Alcatel-Lucent OmniAccess 5740 - Show Ip Ospf Border-Routers

show ip ospf border-routers
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
577
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP OSPF BORDER-ROUTERS
show ip ospf [<1-65535>] border-routers
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the internal OSPF routing table entries to an ABR and ASBR.
PARAMETERS
EXAMPLE
ALU# show ip ospf border-routers
OSPF Process 1 internal Routing Table
Codes : i - Intra-area route, I - Inter-area route
i 6.6.6.6 [100] via 2.2.2.1, GigabitEthernet 3/1, ABR, Area 1,
SPF 5
ALU#
Parameter Description
1-65535 Process ID.
This parameter when specified displays the internal OSPF
routing table entries to an ABR and ASBR for the specified
process ID.
Field Description
6.6.6.6 Router ID of the destination.
[100] Cost of using this route.
via 2.2.2.1 Next hop toward the destination.
GigabitEthernet3
/1
Interface type for the outgoing interface.
ABR The router type of the destination; it is either an ABR or
ASBR or both.
Area The area ID of the area from which this route is learned.
SPF 5 The internal number of the shortest path first (SPF)
calculation that installs this route.