Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
652
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW ARP
show arp [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the ARP entries in the specified VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show arp vrf ALU-vrf
Protocol Address Age (min) Hardware Addr Type Interface
Internet 4.4.4.4 - 0011.8b00.8491 ARPA GigabitEthernet3/0
Internet 4.4.4.2 - Incomplete ARPA GigabitEthernet3/0
Internet 4.4.4.1 0 0002.166f.c4d0 ARPA GigabitEthernet3/0
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name Displays the ARP entries in the specified VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English