Alcatel-Lucent OmniAccess 5740 - Server

Dynamic DNS (DDNS) Client
Left running head:
Chapter name (automatic)
992
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SERVER
server {dyndns|easydns|justlinux|zoneedit} username <username>
password <password>
DESCRIPTION
This command is entered in the DDNS HTTP Configuration Mode. This command
is used to configure the server settings like the server name, user name and the
password for authentication.
If no URL is configured, DDNS client will use this configuration to create a URL
and update the DDNS server.
Note: When URL and server configuration both exists, URL configuration is considered to
update the DDNS server.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-ddns-HTTP)## server dyndns username myMembername
password myMemberPass
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
dyndns|easydns|justlinux|zon
eedit
DDNS server name.
user-name User name for a DDNS method.
password Password for a DDNS method.