Alcatel-Lucent OmniAccess 5740 - Neighbor Next-Hop-Self; Neighbor Peer-Group (Adding Members)

Border Gateway Protocol
Left running head:
Chapter name (automatic)
518
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR NEXT-HOP-SELF
neighbor {<ip-address>|<peer-group-name>} next-hop-self
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
disables the next hop calculation for the specified BGP-speaking neighbor or peer
group.
PARAMETERS
DEFAULT
Disabled.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 next-hop-self
NEIGHBOR PEER-GROUP (ADDING MEMBERS)
neighbor <ip-address> peer-group <peer-group-name>
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command is used to add BGP neighbors to a peer group.
PARAMETERS
DEFAULT
There are no BGP neighbors in a peer group.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 peer-group P1
Parameter Description
ip-address IP address of the BGP neighbor who belongs to the peer
group specified by the tag.
peer-group-name Name of a BGP peer group to which the neighbor belongs.
Parameter Description
ip-address IP address of the BGP neighbor.
peer-group-name Name of a BGP peer group.